Difference between revisions of "Tailscale"

From Indie IT Wiki
 
Line 327: Line 327:
 
  sudo tailscale switch home
 
  sudo tailscale switch home
  
−
'''How do I route specific network traffic via Tailscale but ALL traffic?'''
+
'''How do I route specific network traffic via Tailscale but not all traffic?'''
  
 
This has been a long time coming but I have finally figured this out - ''how to use an exit node but not route all your network traffic through it!''
 
This has been a long time coming but I have finally figured this out - ''how to use an exit node but not route all your network traffic through it!''

Latest revision as of 13:44, 17 October 2024

Introduction

Tailscale is a VPN service that uses WireGuard to create a fast, secure, and simple peer-to-peer network. Tailscale is a zero config VPN that works on any platform, service, or runtime. It encrypts all connections using WireGuard and integrates with 100+ tools for easy deployment and management.

Tailscale is a modern VPN built on top of Wireguard. It works like an overlay network between the computers of your networks - using NAT traversal.

Everything in Tailscale is Open Source, except the GUI clients for proprietary OS (Windows and macOS/iOS), and the control server.

The control server works as an exchange point of Wireguard public keys for the nodes in the Tailscale network. It assigns the IP addresses of the clients, creates the boundaries between each user, enables sharing machines between users, and exposes the advertised routes of your nodes.

A Tailscale network (tailnet) is private network which Tailscale assigns to a user in terms of private users or an organisation.

You can run Tailscale as an SSH Server and as an Exit Node - which means you can remove any SSH ports and have the Tailscale handle all the authentication and use itself as a Gateway for any node on your Tailscale network. Amazing.

Self Hosting

You can self host a Tailscale server with Headscale + Headscale Admin.

Headscale is an open source, self-hosted implementation of the Tailscale control server. Headscale's goal is to provide self-hosters and hobbyists with an open-source server they can use for their projects and labs. It implements a narrow scope, a single Tailnet, suitable for a personal use, or a small open-source organisation.

Headscale Admin is a web frontend for the headscale Tailscale-compatible coordination server.

YouTube - Jim's Garage - Self Host Tailscale with Headscale

Configure and run Headscale

Docker

You can self host a Tailscale server with Headscale + Headscale Admin + Traefik docker containers.

Follow the instructions on the respective web sites and the YouTube (outdated though!) video to get started, including grabbing copies of the docker compose and headscale config/config.yaml files, then edit the first 3 options as follows ... 

server_url: https://headscale.mydomain.com
listen_addr: 0.0.0.0:8080
metrics_listen_addr: 0.0.0.0:9090

Running headscale in a container

This is the directory layout for a Docker Compose method ... 

/root/docker/stacks/headscale
|-- config
|   `-- config.yaml
|-- data
|   |-- db.sqlite
|   `-- noise_private.key
|-- docker-compose.yaml
`-- run
    `-- headscale.sock

3 directories, 5 files

... and this is the docker compose YAML file which has both Headscale and Headscale Admin containers ... 

services:

  headscale:
    container_name: headscale
    volumes:
        - ./config:/etc/headscale/
        - ./data:/var/lib/headscale/
        - ./run:/var/run/headscale/
    ports:
        - 8080:8080
        - 9090:9090
    image: headscale/headscale:0.23.0-alpha12
    environment:
      - TZ=Europe/London
    command: serve
    restart: unless-stopped
    networks:
      traefik:
        ipv4_address: 172.19.0.28
    labels:
      - "traefik.enable=true"
      - "traefik.docker.network=traefik"
      - "traefik.http.routers.headscale.rule=Host(`headscale.mydomain.com`) && PathPrefix(`/`)"
      - "traefik.http.routers.headscale.entrypoints=websecure"
      - "traefik.http.routers.headscale.service=headscale"
      - "traefik.http.services.headscale.loadbalancer.server.port=8080"
      - "traefik.http.services.headscale.loadbalancer.server.scheme=http"

  headscale-admin:
    image: goodieshq/headscale-admin:latest
    container_name: headscale-admin
    restart: unless-stopped
    environment:
      - TZ=Europe/London
    volumes:
        - ./config:/etc/headscale/
        - ./data:/var/lib/headscale/
        - ./run:/var/run/headscale/
    ports:
      - 9999:80
    networks:
      traefik:
        ipv4_address: 172.19.0.29
    labels:
      - "traefik.enable=true"
      - "traefik.docker.network=traefik"
      - "traefik.http.routers.headscale-admin.rule=Host(`headscale.mydomain.com`) && PathPrefix(`/admin`)"
      - "traefik.http.routers.headscale-admin.entrypoints=websecure"
      - "traefik.http.routers.headscale-admin.service=headscale-admin"
      - "traefik.http.routers.headscale-admin.middlewares=auth"
      - "traefik.http.services.headscale-admin.loadbalancer.server.port=80"
      - "traefik.http.services.headscale-admin.loadbalancer.server.scheme=http"
      - "traefik.http.middlewares.auth.basicauth.users=funkyusername:xxxxxxxxxxxxxxxxhashedxxxxpasswordxxxxxxxxxxxxxxx"

networks:
  traefik:
    external: true

Start up the containers, and you should see these lines in the docker logs ... 

headscale        | 2024-05-31T10:53:13+01:00 INF Opening database database=sqlite3 path=/var/lib/headscale/db.sqlite
headscale        | 2024-05-31T10:53:13+01:00 INF Setting up a DERPMap update worker frequency=86400000
headscale        | 2024-05-31T10:53:13+01:00 INF listening and serving HTTP on: 0.0.0.0:8080
headscale-admin  | {"level":"info","ts":1717149193.3994539,"logger":"http","msg":"enabling HTTP/3 listener","addr":":443"}
headscale-admin  | {"level":"info","ts":1717149193.4059176,"msg":"serving initial configuration"}

Test the headscale server with curl and the docker image ... 

curl 0.0.0.0:9090/metrics
docker exec headscale headscale --help
docker exec headscale headscale version
docker exec headscale headscale nodes list
docker exec headscale headscale apikeys list

Navigate to the Headscale Admin web address you provided in the config.yml file with /admin at the end - https://headscale.mydomain.com/admin) and then you will see an error about Authentication and missing API key.

Generate your server's API key. You only get one chance to see this ... 

docker exec headscale headscale apikeys create

... copy it, then go the Headscale Admin Settings page and paste it there with your 'server_url' from the config file.

Then press the SAVE button.

Yay - you have successfuly set up your own self-hosted Tailscale server! :-)

Now you can add your first client device.

Client Devices

Windows

https://tailscale.com/download/windows

Prevent Auto-Connect on Restart/Login

Linux

Software Installation

Native

Install the software ... 

curl -fsSL https://tailscale.com/install.sh | sh

Go to your Admin server and grab your pre-auth key.

Join the tailnet ... 

tailscale up --login-server=https://headscale.mydomain.uk --authkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx --accept-dns=false

WEB

There is a built-in web interface with tailscale, which you can access by running this command ... 

sudo tailscale set --webclient

... and then pointing your web browser at the address it tells you to - e.g. http://100.64.0.1:5252

To stop the web interface, run this command ... 

sudo tailscale set --webclient=false

GUI

https://github.com/DeedleFake/trayscale

Docker

https://hub.docker.com/r/tailscale/tailscale

https://tailscale.com/kb/1282/docker

Create your pre-auth key on your Headscale server using Headscale Admin.

Pull the image ... 

docker pull tailscale/tailscale:latest

Start the docker passing the login server and pre-auth key environment variables ... 

docker run -d --name=tailscale -v /var/lib:/var/lib -v /dev/net/tun:/dev/net/tun --network=host --cap-add=NET_ADMIN --cap-add=NET_RAW --env TS_STATE_DIR=/var/lib/tailscale --env TS_AUTHKEY=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx --env TS_EXTRA_ARGS=--login-server=https://headscale.domain.uk --advertise-exit-node --env TS_HOSTNAME=mynodehostname tailscale/tailscale

Test ... 

docker exec tailscale tailscale --socket /tmp/tailscaled.sock status

Ping a node ... 

docker exec tailscale tailscale --socket /tmp/tailscaled.sock ping nameofnode

Job, done.

Here is the Docker Compose for all that ... 

services:
  tailscale:
    container_name: tailscale
      volumes:
        - /var/lib:/var/lib
        - /dev/net/tun:/dev/net/tun
      network_mode: host
      cap_add:
        - NET_ADMIN
        - NET_RAW
      environment:
        - TS_STATE_DIR=/var/lib/tailscale
        - TS_USERSPACE=false
        - TS_AUTHKEY=f85ff211b94078a1xxxxxxxxxxxxxxx079bae00769e51
        - TS_EXTRA_ARGS=--login-server=https://headscale.mydomain.uk --advertise-exit-node
        - TS_HOSTNAME=mynodehostname
      image: tailscale/tailscale
      restart: unless-stopped

Cloud Init

https://www.youtube.com/watch?v=e-X5FJwrkaA

Users

Generate a User on the Headscale server first, then register a Node linked to that User. 

docker exec headscale headscale users create <USER_NAME>

Nodes

Registration

Method 1: Register a machine using normal login

On a client machine, run the tailscale login command, which will output a machine key (mkey) ... 

sudo tailscale up --login-server <YOUR_HEADSCALE_URL>

On the server, run the headscale nodes command to register that client machine node using that mkey to a User ... 

docker exec headscale headscale nodes register --key <mkey:YOUR_MACHINE_KEY> --user <USER_NAME>

Method 2: Register a machine using a pre authenticated key

Generate a key linked to a User ... 

docker exec headscale headscale preauthkeys create --reusable --expiration 24h --user <USER_NAME>

This will return a pre-authenticated key that can be used to connect a node to headscale during the tailscale login command on the client ... 

sudo tailscale up --login-server <YOUR_HEADSCALE_URL> --authkey <YOUR_AUTH_KEY>

Testing

On the server, run the command to list the connected nodes ... 

docker exec headscale headscale nodes list

ID | Hostname      | Name          | MachineKey | NodeKey | User   | IP addresses                  | Ephemeral | Last seen           | Expiration          | Connected | Expired
1  | paully-laptop | paully-laptop | [v6BuV]    | [E5A+n] | paully | 100.64.0.1, fd7a:115c:a1e0::1 | false     | 2024-05-31 12:56:23 | 0001-01-01 00:00:00 | online    | no

Exit Node

Want to hide your real IP address or "be in a different country"?

Server

Spin up your virtual private server in France and when you join that node to your tailnet, just advertise it as an 'exit node' ... 

sudo tailscale up --login-server=https://headscale.mydomain.uk --authkey=a8590d89ca494b27cxxxxxxxxxxx5e3e923cc2ad974ee1be --advertise-exit-node --hostname=exit-node-fr-1 --accept-dns=false

Then toggle the option in your client to use the exit node in France 'exit-node-fr-1' and check your IP address at https://ipinfo.io

Client

List exit nodes on your tailnet ... 

sudo tailscale exit-node list

IP              HOSTNAME                                        COUNTRY     CITY      STATUS      
100.64.0.2      nodename.username.tailscale.tailnet.name        -           -         -

Then set your traffic to go through that exit node ... 

sudo tailscale set --exit-node=100.64.0.2

https://tailscale.com/kb/1103/exit-nodes

Subnet Routers

https://tailscale.com/kb/1019/subnets

Pi-Hole with Tailscale

https://shotor.com/blog/run-your-own-mesh-vpn-and-dns-with-tailscale-and-pihole/

HowTos

What's my tailnet name? 

tailscale status --json | jq -j '.MagicDNSSuffix'

How do I list my tailnets? 

sudo tailscale switch --list

How do I login to multiple tailnets? 

sudo tailscale login --login-server https://controlplane.tailscale.com --auth-key string --nickname work
sudo tailscale login --login-server https://tailscale.mydomain.com --auth-key string --nickname home

How do I switch tailnets? 

sudo tailscale switch --list
sudo tailscale switch work
sudo tailscale switch home

How do I route specific network traffic via Tailscale but not all traffic?

This has been a long time coming but I have finally figured this out - how to use an exit node but not route all your network traffic through it!

In this example, we will be routing traffic to a server through Tailscale but delete the network's default device of the Tailscale tunnel ... 

sudo -i
tailscale up
tailscale status
tailscale set --exit-node=100.64.0.2 --exit-node-allow-lan-access=true
ip route add 3.10.67.19/32 dev tailscale0 table 52 scope global
ip route del default dev tailscale0 table 52
ip route get 3.10.67.19
ping 3.10.67.19
ip route get 1.1.1.1
ping 1.1.1.1
ip route get 192.168.0.1
ping 192.168.0.1

Links

Tailscale CLI

Tailout - a command-line tool for quickly creating a cloud-based exit node in your tailnet.

Authentication

https://github.com/gmiles32/headscale-authelia

Remote Access

Remote Access using Tailscale

  • RustDesk > Settings > Security > Direct IP Access + IP Whitelisting (e.g. tailscale IP range = 100.64.0.x)
  • RustDesk > Settings > Security > Password > Use Permanent Password
Retrieved from ‘https://wiki.indie-it.com/index.php?title=Tailscale&oldid=3502’