Dell

Service Tag Support

https://www.dell.com/support/home/uk/en/ukbsdt1

XPS Laptop

CNX93618

Dell XPS Developer Edition with Ubuntu Linux - go for the Iris Plus Graphics Intel 640 NON TOUCH DISPLAY

USB-C Adapter for use with laptop = Aukey CB-C34

XPS 13 9350

Keep Backlight ON for Keyboard

1. Shutdown system.
2. Press F2 on Dell logo during power on and go into system BIOS.
3. On the left expand System Configuration.
4. Under System Configuration click Keyboard Backlight Timeout on AC and set it to Never and click Apply at the bottom.
5. Repeat the same step for Keyboard Backlight Timeout on Battery.
6. Make sure to click Apply after setting the change to Never and then click Exit to exit from BIOS and boot to Windows.
7. Your problem will be solved.

BIOS Update

Recent Dell BIOSes have a built-in upgrade module.

1. Download the appropriate .EXE upgrade program from Dell website.
2. Write this file to a USB drive.
3. Insert said USB drive and reboot. (NB : if your computer boots in UEFI mode, you can instead put the .EXE in the /boot/efi partition : it should be found automatically)
4. As the Dell logo appears, press F12 to enter the One-time Boot Menu
5. In this menu, select Bios Flash Update. If this entry does not appear, your BIOS does not have the built-in upgrade module.
6. In the upgrade module, locate the .EXE upgrade program on the USB disk.
7. Launch the upgrade process.

Update the Dell BIOS in a Linux or Ubuntu environment

Update the BIOS in Ubuntu Linux

Miscellaneous

Official Dell Support

Dell Firmware

JHXPY53 Battery Replacement

JHXPY53 Battery

Warranty Check

Warranty Check Dell XPS Laptop :-)

Precision Tower T3620

Wake On Lan

http://en.community.dell.com/support-forums/desktop/f/3514/t/19618886

https://www.puryear-it.com/enable-wake-lan-wol-dell-workstations

http://en.community.dell.com/techcenter/enterprise-client/w/wiki/7532.dell-command-configure

Photo 964 AiO

How to install in Windows 7 - see here.

3115cn AiO

User Guide

It appears that while the Dell 3115cn has a scanner and software that will allow you to scan from the desktop it is only possible to do this via a direct connection, i.e. USB. Scanning over the network is not possible, however scanning from the unit itself to a PC is possible. So when installing the Dell 3115cn for network printing it is only necessary to install the driver software and where required the status monitoring software, everything else is bloat.

Before starting ensure that you have the following:

• The IP address of the printer
• The IP address of the computer(s)
• The Windows log on name of each user

Computer Client

• On each PC you will need to create a folder called 'dellscan' (without the speech marks)
• Make the folder available to all users using Windows 'Sharing and Security' options

Printer (Via Web Interface)

• Next in a web browser in the address bar enter the printer's IP address
• If a log in screen appears enter 'admin' for the username, in its default state the password is blank
• You have now logged on to the printer
• From the links on the left-hand side click on 'Address Book'
• From the tabs click on “Server Address”
• Click “add”
• ID - This is the numbered place in the address book and is prefilled and is not editable
• Name - The name of the user, e.g. Fred Dibnah
• Server Type - Select SMB
• Server Address - The IP address of the client computer (not the printer)
• Server Port Number - 139
• Login Name - the login name of the client computer, e.g. fdibnah
• Login Password - Depending on your network set up this may or not be needed
• Share Name - dellscan
• Server Path - Skip this

Sending A Scan To A PC

• Use up/down arrows to select 'Scan'
• Press the tick button
• Use up/down arrows to select 'Scan to Network'
• Use left/right arrow keys to select 'Computer'
• Press tick to select
• Use up/down arrows to select user
• Press the tick button twice then press the triangle key to finalize scan

Information for the above was gratefully cribbed from here

Dell B1260dn Mono Laser Printer

• ID: admin
• Password: dell00000

PDF User's Guide

Dell 5110cn

Default user account settings:

• Username: admin
• Password: blank (as in it does not have one, do not type 'blank')

PowerEdge Servers

OpenManage

Admin Password for 3110cn, 3115cn, and 5110cn Color Laser Printers

The username and password information found in the Users Guides for the 3110cn, 3115cn, and 5110cn Color Laser Printers is incorrect.

The username is admin and cannot be changed. The factory default password is not set, and the password field should be left empty to access the Dell Printer Configuration Web Tool. The password can be changed using the Dell Printer Configuration Web Tool, Set Password link. After the password has been changed, the browser window must be closed and re-opened. Otherwise, it may appear as if the password change was ineffective.

You must know the old password before you can save a new password. If the old password is unknown, resetting the network non-volatile random-access memory (NVRAM) is required to clear the old password before a new password can be set.

Notice:

	Resetting the NVRAM clears all customized network settings. 	 

Reset NVRAM on the Dell™ 3110cn Printer

   Press the Menu button.

   Press the button until Admin Menu appears, then press the  button or the button.

   Press the button until Wired Network is displayed, then press the  button or the button.

   Press the button until Reset LAN appears, then press the  button or the button.

   When the Are you sure? message appears on the operator panel, press the button.
   The display momentarily indicates Initializing..., followed by Initialized, followed by Restart Printer to apply setting. The display returns to Wired Network and Reset LAN.

   Turn the printer off, wait a few moments, and then turn the printer on. 

Reset NVRAM on the Dell™ 3115cn Printer

   When the printer is Ready (Copy, Scan, Fax appears in the LCD), press the button until Setup is indicated, then press the This is an image of the enter button button.

   Press the button until Admin Menu appears, then press the button.

   Press the button until Wired Network is displayed, then press the button.

   Press the button until Initialize NVM appears, then press the button.

   When the Are you sure? message appears on the operator panel with the default indicated as No, press the or button to indicate Yes, then press This is an image of the enter button button. The display momentarily indicates Wired Network, Initialize NVM, Initializing... followed by Restart Printer to apply setting.

   When the display returns to Initialize NVM, turn the printer off, wait a few moments, and then turn the printer on. 

Reset the Network NVRAM on the 5110cn Printer

   Press the Menu button.

   Press the  button until Admin appears, and then press the  or  (Set) button.

   Press the  button until Wired Network appears, and then press  or   (Set) button.

   Press the  button until Reset LAN appears, and then press  or  (Set) button.

   When the message Are you sure? appears, press the  (Set) button.

   When Initialized and Restart Printer appears, power off the printer and power back on. 

Shamelessly ripped from here.