Fetchmail

Fetchmail is a full-featured, robust, well-documented remote-mail retrieval and forwarding utility intended to be used over on-demand TCP/IP links (such as SLIP or PPP connections). It supports every remote-mail protocol now in use on the Internet: POP2, POP3, RPOP, APOP, KPOP, all flavors of IMAP, ETRN, and ODMR. It can even support IPv6 and IPSEC.

Test

fetchmail --version --verbose
fetchmail --check --verbose
fetchmail --check

Use POP3S SSL

Change the port and use the keyword 'ssl'...

poll mail.domain.co.uk protocol pop3 port 995 localdomains domain.co.uk
     username "info@domain.co.uk" password "mypassword" is info here fetchall ssl

HOWTO: Stop Warning Message About SSL

To remove this warning message on every poll...

fetchmail: Warning: the connection is insecure, continuing anyways. (Better use --sslcertck!)

Add this line to your .fetchmailrc

defaults sslproto ''

Add Your Certificate To Fetchmail

How to make fetchmail happy with the server’s SSL cert.

Have you tried running fetchmail against a POP3S server and gotten these messages over and over?

fetchmail: Server certificate verification error: unable to get local issuer certificate
fetchmail: Server certificate verification error: certificate not trusted
fetchmail: Server certificate verification error: unable to verify the first certificate

1. Make sure a recent openssl is installed and your fetchmail is linked against it, etc, etc
2. Run “openssl s_client -connect pop.gmail.com:995 -showcerts” (hit enter after the output to exit)
3. Cut and paste the stuff between the “—–BEGIN CERTIFICATE—–” and “—–END CERTIFICATE—–” lines (inclusive) into a file pop.gmail.com.pem
4. Review the rest of the output for the “issuer=” line (in this case, “Equifax Secure Certificate Authority”)
5. Go here and grab the “Base-64 encoded X.509” version of the cert for “Equifax Secure Certificate Authority”
6. Rename that file with a “.pem” extension
7. Make a certs directory somewhere (i.e. /usr/local/etc/fetchmail/certs) and put both files in it
8. Run “c_rehash /usr/local/etc/fetchmail/certs”
9. Add this to your .fetchmailrc under the “poll” section for this server: “sslcertck sslcertpath /usr/local/etc/fetchmail/certs”
10. Run “fetchmail -v” and see if the warnings are gone!
11. You will need to do this for each server that you poll with SSL (both the server and its issuer’s PEM).

https://geekmush.wordpress.com/2007/06/29/how-to-make-fetchmail-happy-with-the-servers-ssl-cert/

HOWTO: Increase Message Size Limit

This sets the message size limit to 25MB, the same as GMail. You have to edit 2 pieces of software. You also have to make sure that the Postfix limit is slightly larger than the Fetchmail limit :)

Fetchmail

fetchmail --quit
sleep 3
fetchmail --limit 25000000

Postfix

sudo postconf -e "message_size_limit = 26000000"
sudo service postfix restart

Date and Time Not Being Logged On Every Check

Add the preconnect command to the configuration file:-

preconnect "date >> /home/postman/fetchmail.log"

Fetchmail with GMail Good Example

https://www.axllent.org/docs/gmail-pop3-with-fetchmail/