Motion

From Indie IT Wiki
Revision as of 15:00, 20 July 2020 by imported>Plittlefield
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Introduction

Motion is a program that monitors the video signal from cameras. It is able to detect if a significant part of the picture has changed; in other words, it can detect motion.

https://motion-project.github.io/

http://www.lavrsen.dk/foswiki/bin/view/Motion/WebHome

Installation

Gentoo Linux

Even though 'motion' is in the Portage tree, you will need to download and use the svn ebuild, because the official ebuilds do not work with the latest kernels, specifically the 'v4l' drivers.

https://bugs.gentoo.org/show_bug.cgi?id=376225

su - root
mkdir -p /usr/local/portage/media-video/motion/files
cd /usr/local/portage/media-video/motion/
wget https://376225.bugs.gentoo.org/attachment.cgi?id=288617 -O motion-9999.ebuild
cd /usr/local/portage/media-video/motion/files/
wget http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/media-video/motion/files/motion.initd-r2
wget http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/media-video/motion/files/motion.confd
echo "media-video/motion **" >>/etc/portage/package.keywords
emerge motion

Ubuntu Linux

https://github.com/Motion-Project/motion/releases

https://github.com/Motion-Project/motion/releases/download/release-4.3.1/bionic_motion_4.3.1-1_amd64.deb

sudo dpkg -i bionic_motion_4.3.1-1_amd64.deb
sudo apt-get -f install

Configuration

https://motion-project.github.io/motion_config.html

Basic

nano /etc/motion.conf
     target_dir /tmp/cam1   (or /path/to/saved/files)

RTSP Stream from Wi-fi webcam camera

https://motion-project.github.io/motion_config.html#netcam_url

You can use Motion to capture movement in an RTSP stream from a cheap wi-fi camera like this one...

http://wiki.indie-it.com/wiki/Security#V380_Shenzhen_Trolink_Technology

Create your configuration folder and copy the master settings file...

mkdir /tmp/cam1
mkdir ~/.motion
sudo cp /etc/motion/motion.conf ~/.motion/
nano ~/.motion/motion.conf

Comment out the videodevice setting and add the stream settings...

target_dir /tmp/cam1
# videodevice /dev/video0
netcam_url rtsp://192.168.0.165:554/mpeg4
netcam_userpass admin:password

Run motion pointing to the configuration file...

motion -c ~/.motion/motion.conf

Check the logs...

[1:ml1] [NTC] [EVT] event_newfile: File of type 8 saved to: /tmp//0-01-20200720144621.mkv
[1:ml1] [NTC] [ALL] motion_detected: Motion detected - starting event 1
[1:ml1] [NTC] [ALL] mlp_actions: End of event 1

View the live feed..

firefox http://localhost:8081/

Watch the videos...

mpv /tmp/cam1/0-01-20200720144621.mkv

You can send an email or a push notification on an event...

https://github.com/aaronfagan/pushover-cli/blob/master/pushover

on_event_start /usr/bin/pushover-cli --quiet --title "Webcam Motion" --message "...started."
on_event_end /usr/bin/pushover-cli --quiet --title "Webcam Motion" --message "...ended."
on_movie_end /usr/bin/pushover-cli --quiet --title "Webcam Motion" --message "...recorded."

Running

/etc/init.d/motion start

Testing

tail /var/log/syslog
     motion_startup: Motion trunkREV544 Started
     become_daemon: Motion going to daemon mode
     main: Thread 1 is from /etc/motion.conf
     main: Thread 1 is device: /dev/video0 input -1
     motion_init: Started motion-stream server in port 8081

Fire up your web browser to address - http://127.0.0.1:8081

     motion_detected: Motion detected - starting event 1
     create_path: creating directory /tmp/cam1
     event_newfile: File of type 1 saved to: /tmp/cam1/01-20111102170811-00.jpg